Raj Enterprises

Minimum order quantity: 1 Piece

The fischer high-performance mortar FIS V is the universal all-rounder for the most demanding requirements. The styrene-free vinylester-hybrid mortar is the first system worldwide that is approved for fixings in perforated brick, solid brick, concrete, and aerated concrete. The injection mortar system also benefits from approved system components such as anchor rods, anchors with internal threads, and injection anchor sleeves for fixings in concrete, aerated concrete, and masonry in both internal and external areas. The fischer high-performance mortar FIS V is also used with the approved system components for rebar connections, the fischer remedial wall tie VBS 8, and the TherMax stand-off insulation system.

The fischer high-performance mortar FIS V is the universal all-rounder for the most demanding requirements. The styrene-free vinylester-hybrid mortar is the first system worldwide that is approved for fixings in perforated brick, solid brick, concrete, and aerated concrete. The injection mortar system also benefits from approved system components such as anchor rods, anchors with internal threads, and injection anchor sleeves for fixings in concrete, aerated concrete, and masonry in both internal and external areas. The fischer high-performance mortar FIS V is also used with the approved system components for rebar connections, the fischer remedial wall tie VBS 8, and the TherMax stand-off insulation system.

Fischer Chemical Injection Mortars FIS V 360 Building materials Approved for anchorings in: Concrete C20/25 to C50/60, cracked and non-cracked Hollow blocks made from lightweight concrete Hollow blocks made from concrete Vertically perforated brick Perforated sand-lime brick Solid sand-lime brick Aerated concrete Solid ...

DISCRIPTION : A two component chemical anchoring injection system. A formulation derived from polyester resin with high bond strength, developed principally to anchor threaded rods into concrete, and for masonry and hollow wall installations.

Minimum order quantity: 100 Piece

Injection grouting is usually carried out from the surface and is the common method for filling cracks, open joints. Grouting can strengthen a structure and can prevent a water movement. When the ports are drilled after sealing the openings and the grout pressure is up to 350k Pa a hand held, cone shaped fitting on the grout hose connections. For large grout pressures short pipe nipples are connected in to the holes to obtain grout hose connections.