Raj Enterprises

Conbextra EP10 is a low viscocity epoxy grout for situations where heavy dynamic or mobile loads are encountered. It is ideal for grouting in small gaps between a base plate and substrate which needs filling and the structural load be uniformly distributed. Typical applications are reciprocating machinery, testing equipment, heavy crane and transporter rails, high speed turbines, centrifuges and drop forges. Also for use in conditions where chemical spillage may be encountered. Typical situations could be met in steelworks, refineries, electroplating works and chemical plants. Due to the low viscocity of Conbextra EP10 it can be used to fill hairline cracks in concrete slabs from 0.25mm and larger on horizontal surfaces using a gravity fed method. Using suitable equipment, Conbextra EP10 can also be used to pressure inject cracks down to 0.10mm. Conbextra EP10 can also be used for anchoring vertical starter bars and other vertical anchoring applications such as hold down bolts. Refer to the Fosroc Epoxy Anchoring Application Guidelines available on the Fosroc website. Advantages  High compressive, tensile and flexural strengths  Resistant to repetitive dynamic loads  Fast, convenient installation with early strength gain  Withstands a wide range of chemicals  Non-shrink and hence ensures complete surface contact and bond  Low creep characteristics under sustained loading Description Conbextra EP10 is a two component low viscosity epoxy system for grouting gaps up to 10mm and crack injection.