Raj Enterprises

STARPROOF WF SP 600 is a special synthetic resin-based waterproof coating, because of its excellent flexibility and thixotropic nature, it is ideal for use on horizontal as well as inclined surfaces. 

CHRYSO® STRUCO EXCEL is a heavy duty damp proofing (water repellency) admixture for concrete, mortars and any type of cementitious renders. The presence of this integral compound resists and reverses the normal tendency of hardened concrete to absorb water by capillary action and makes the concrete totally sealed against penetration of water (or liquids). CHRYSO STRUCO EXCEL conforms to IS: 2645‐2003.

Hydrostop is the new generation polymer modified bituminous waterproofing membrane, consisting of a central non woven, 160 gsm (Minimum) polyester core, impregnated and coated on both sides with layers of APP ( Actactic Polypropylene Polymer) modified bitumen and finished with mico-perforated, heat fusible polyethylene film on both surfaces.

Brushbond TGP crystalline capillary waterproofing system is a blend of proprietary Portland cements, quartz aggregates and specialised chemicals. In the presence of moisture, the active chemical additives in Brushbond TGP penetrate concrete and react chemically with free lime to produce insoluble crystals. This crystalline growth reduces concrete porosity by blocking capillaries and filling hairline cracks caused by shrinkage or expansion. Unlike membrane types of waterproofing which only provide a surface barrier, Brushbond TGP continues to produce crystals in the presence of water therefore providing long lasting impermeability.

Uses Brushbond TGP is an economical cementitious coating system designed for waterproofing concrete against low (less than 1 bar) positive or negative hydrostatic water pressure in a wide variety of structures such as: „ Sewage treatment and water treatment plants „ Water tanks „ Concrete pipes „ Manholes Advantages „ Penetrates concrete, seals capillary tracts and hairline cracks „ Contains no chlorides „ Easy to apply, cost effective in use „ Can be applied to new or old concrete in both interior and exterior locations „ Suitable above or below ground „ Surface damage will not affect the system

What are the 4 steps to waterproofing?4 Steps for Waterproofing Pools

Smooth the Substrate.

Clean the Substrate.

Apply the Waterproofing Membrane.

Test for Leaks.

CHRYSO ARMOURCRETE is an acrylic polymer used as cementitious waterproof coating and repair mortar for concrete structure. When CHRYSO ARMOURCRETE Polymer is mixed with cement, a liquid slurry is formed and this slurry used as waterproof coating.

STARPROOF WF MB 602 is a Liquid bituminous elastomeric waterproofing membrane, specially designed from a blend of special resin and rubber, reinforced with special water-repelling fillers, minerals stabilizers, and gelling agent. It is a tough yet extremely flexible coating that can be efficiently applied to any thickness by roller or squeegee creating a fully adhered waterproofing coating with no wastage. It is water based with low VOC’s that is sustainable for years as a waterproofing coating.

Sika Raintite I is a multifunctional polymer emulsion for enhancing the properties of mortar/ concrete / grout/ cement slurry providing good adhesion, water resistance and improvement of several other properties.